Slice S4XU-S

20190508_201958.jpg
20190508_202108.jpg
20190508_202114.jpg
20190508_202121.jpg
20190508_202133.jpg
20190508_202048.jpg
20190508_201635.jpg
20190508_201640.jpg
20190508_201646.jpg
20190505_125803.jpg
20190505_125812.jpg
20190505_125750.jpg
20190508_201958.jpg
20190508_202108.jpg
20190508_202114.jpg
20190508_202121.jpg
20190508_202133.jpg
20190508_202048.jpg
20190508_201635.jpg
20190508_201640.jpg
20190508_201646.jpg
20190505_125803.jpg
20190505_125812.jpg
20190505_125750.jpg

Slice S4XU-S

90.00

The Slice S4XU-S is a high power/high speed chassis. Made to use a 1/8 scale power system. And able to carry two batteries. Easily run 6s power on your Slash 4WD LCG This chassis comes with its own motor mount plate. The plate can easily be attached to the stock bearing block. Or just about any aftermarket block out there. The motor mount plate is made of 1/8 G10 fiberglass composite. At this thickness and shape. Its super ridged! Any 1/8 motor will bolt right up. And there’s enough adjust-ability to use a wide range of pinions. Also, you can pretty easily make a smaller set of mounting hole if you want to run a 1/10 scale motor. There’s plenty of room on the upper deck for you ESC and RX. The chassis can accept two 3s batteries. Up to about 5000 mah. Its very well balanced. Handles beautifully even at higher speeds. If you want to go real fast. This is the chassis you want on your Slash.

Quantity:
Add To Cart